[TOUGHPAD] FZ-X1 System software "Version: tcd_tough-10-300-01-003-061" installation file from connected PC with USB cable

This document describes how to update Software of FZ-X1 from internal storage.

[Preparation]
 Use PC for the software update.

1. Download the update Software file from the download site to PC.
2. Connect FZ-X1 and PC with USB cable.
   Please refer to following "Referential Document: FZ-X1 ADB USB Driver".
3. After FZ-X1 has been recognized by PC as media storage, save the update Software file to "Download" folder of the internal storage of FZ-X1.
   Note* If more than one files are stored in "Download" folder,
   "Two or more software is stored in the "Download" folder." message appears, and update is not available.

[Lists of main Update]

• Europe Models with Barcode Reader:
   - FZ-X1AFA*A**, FZ-X1AFA*P**
   - FZ-X1AFA*Z**, FZ-X1AFA*1**

  Version: tcd_tough-10-300-01-003-061

• Australia and New Zealand Models:
   - FZ-X1ALA*A**

  Version: tcd_tough-10-300-01-003-061

1. Fix the issue that uplink traffic is increased than the one of expectation.
2. Fix GPS Week Number Rollover issue.
3. Fix the issue that the camera preview screen not be responded after 30 minutes.

tcd_tough-10-300-01-003-061

• In firmware version at the time of product shipment, can't be downgraded from "after tcd_tough-10-300-01-003-049" to "tcd_tough-10-300-01-003-033, 036, 043, 046 and 047".
• In firmware version at the time of product shipment, can't be downgraded from "after tcd_tough-10-300-01-003-057" to "tcd_tough-10-300-01-003-033, 036, 043, 046, 047 and 049".
• In firmware version at the time of product shipment, can't be downgraded from "after tcd_tough-10-300-01-003-059" to "tcd_tough-10-300-01-003-033, 036, 043, 046, 047, 049 and 057".